To be used with:Epson Stylus Pro4880 Volume:300ml cartridge size:250mm*25mm*100mm (9.9"*1.0"*3.9")/pc Net Weight:168g/pc Packing size:290mm*260mm*120mm（11.4"*10.2"*4.7")/set Gross Weight:1680g/set Remarks:OEM colors:
Using the decoder: remove the cartridge when the chip alarms that the ink is used up;
keep the contact point of the decoder touching at the chip surface
of the ink cartridge; when the red light of decoder becomes yellow,
the decoding has been finished.
Our chips on the cartridges can be used on Epson Stylus Pro 7600/
9600/ 4000/ 4400/ 4450/4800/ 4880. Our special software makes the
chips compatible for all work of the above Epson printers. Please do as follows when using the chip: • The printer shows NON-GENUINE when you install the cartridge, now
please press direction keys on the panel ＜、∨、＞, to choose ACPT
• Afterabove operation, printer will do the cleaning and recognize
these chips. Theprinter screen shows READY. The cartridge is empty
and the ink capacity incomputer drive software is grey.
• The printer will warn that it is not using genuine Epson ink.
Please close the message box and then the printer can begin work.
• The chip will not indicate the real-time ink consumption. When it
runs to the assumed ink limit, the relative Ink-out area blinks and
the panel shows REPLACE INK CRTG. A chip resetter is needed to make
the chip reuse.